FEATURES
- Routes all 40 I/O and power pins to pluggable terminal blocks
- Easy and secure field installation and debugging
- 150 mils Pitch Heavy Duty Pluggable Terminal Block Connectors
- Terminals rated voltage: 300V
- Terminals rated current: 8A
- Wire range: 24 - 14 AWG
- Brass standoffs, screws and nuts included
ERRATA: There is an error on the silkscreen, which should be rotated 180°
DESCRIPTION
PLUGGABLE BREAKOUT CARD for Raspberry Pi with male-female pluggable connectors.
The Pluggable Breakout Card connects the GPIO pins to heavy-duty pluggable terminal blocks. It can be used both for Raspberry Pi and for the Home Automation Cards. The 2x20 pin header can be plugged into Raspberry Pi or into any stackable expansion card.LAYOUT

COMPARE TO COMPETITION
Smaller, cheaper, better.
YOUR KIT
When you purchase the Breakout Type 3 Kit you will receive the following items:
1. Breakout Type 3 for Raspberry Pi

2. Mounting Hardware

3. Connector Plugs

OTHER BREAKOUT CARDS
We have three breakout cards for Raspberry Pi, to satisfy all your prototyping needs. All cards plug into the Raspberry Pi 40 pin GPIO connector and bring the IO's to different terminal blocks.
The card has a large prototype area of 5 x 40 holes at 0.1" spacing which can be used to test your own hardware. The terminal blocks accept 26 to 18 AWG wires and are rated 6A/150V.
Breakout Card Type 2.
This card uses spring loaded terminal blocks, which permit rapid connection to I/O pins without any tools. The card has a prototype area of 7 x 19 holes at 0.1" spacing which can be used to test your own hardware. The terminal blocks accept 22-18 AWG wires and are rated 5A-300V.
Breakout Card Type 3.
This card connects the GPIO pins to heavy-duty pluggable terminal blocks. It can use used both for Raspberry Pi and for the Home Automation Cards. The 2×20 pin header can be plugged into Raspberry Pi or into any stackable expansion card or HAT. The terminal blocks accept 24 to 14 AWG wires and are rated 8A/300V.