Pluggable Connectors for Raspberry Pi IO Cards

We provide all the required plugs with each card, but sometimes customers want to have spares, or loose some parts. 

The male connectors are soldered on the board. The female part holds the wires, usually 13 - 22AWG, with screws. Pitch is from 3.5mm to 5.08mm.


A good source for buying spare connector plugs is Newark. Same parts can be found at Digikey and Mouser. 

LIST OF 3.5mm PLUGGABLE CONNECTORS

LIST OF 3.81mm PLUGGABLE CONNECTORS

LIST OF 5.08mm PLUGGABLE CONNECTORS



Write a comment

Please login or register to comment