Category: HOME Automation
HOME Automation
Raspberry Pi IO Cards for Home Automation.
Open Source hardware including complete schematics.
NodeRed, Command Line and Python drivers
Showing all 9 results
Home Automation
$50.00
8-Layer Stackable Card
for Raspberry PiAdd to cart- 32-bit Processor running at 48MHz
- Eight relays with status LEDs and pluggable connectors
- Eight layer stackable
- Eight 12-bit A/D inputs
- Four 12-bit DAC outputs (0-10V dimmers) or
- Four open-drain outputs (30V/5.7A MOSFETs)
- Eight optically isolated digital inputs
- 30 GPIOs (26 GPIOs from Raspberry Pi + 4 new)
- On-board hardware watchdog
- On-board resettable fuse
- Command line and Python drivers
- Node-Red source code examples
- All mounting hardware included: stand-offs, screws and nuts
- Hardware self-test with included loop-back card
- Open source hardware and schematics
Raspberry Pi RELAYS
$30.00
8-Layer Stackable Card
for Raspberry PiAdd to cart- Eight RELAYS with Status LEDs
- Eight layer stackable to 64 relays
- Heavy Duty Pluggable Terminal Blocks
- 4 Relays with NO and NC Contacts, rated 4A/120VAC or 4A/24VDC
- 4 Relays with NO only Contacts rated 8A/48VAC or 8A/24VDC
- Software self-test
- Command Line and Python Drivers
Raspberry Pi Watchdog
$25.00
with Battery Backup
for all Raspberry Pi’sAdd to cart- A must for all RPI mission critical installation
- Cycle RPI power after software lock-up
- Prevent SD Card damage during power outages
- Run for hours on Li-Ion 18650 battery
- On board battery charger, step-up converter and intelligent power monitor
- Dual power supply jacks: micro USB and barrel
- Provide up to 3.5A/5V power to Raspberry Pi from Li-Ion Battery
- On board resettable fuse
- Command line and Python drivers
Pluggable Breakout Card Type-3
$20.00
Accepting 24-14 AWG wires
for Raspberry PiAdd to cart- Routes all 40 I/O and power pins to pluggable terminal blocks
- Easy and secure field installation and debugging
- 150 mils Pitch Heavy Duty Pluggable Terminal Block Connectors
- Terminals rated voltage: 300V
- Terminals rated current: 8A
- Wire range: 24 – 14 AWG
- Brass standoffs, screws and nuts included
COMPARE TO COMPETITION
Smaller, cheaper, better.
Spring Loaded Breakout Card Type-2
$14.00
Accepting 22-18 AWG wires
for Raspberry PiAdd to cart- 3.5mm Pitch PCB Spring-loaded Terminal Block Connectors
- Stainless steel wire guard
- Phosphor bronze, tin plated pin header
- Rated Voltage: 300V
- Rated Current: 5A
- Contact Resistance: 20 mOhms
- Insulation Resistance: 5000 MOhms/DC 1000V
- Wire Range: 22-18 AWG
- Strip Length: 8-9 mm
Screw Mount Breakout Card Type-1
$12.00
Accepting 26-18 AWG wires
all Raspberry PiAdd to cart- Routes all 40 I/O and power pins to screw terminal blocks
- Permits easy and secure field installation
- Prototype area for your custom projects
- 2.54mm Pitch PCB screw Terminal Block Connectors
- Rated voltage: 300V
- Rated current: 10A
- Wire range: 24 – 18 AWG
Uno, Nano, Teensy, Feather, ESP32
$10.00
Raspberry Pi Replacement
for all I2C I/O CardsAdd to cart- Mechanical dimensions identical with Raspberry Pi HAT
- Replace Raspberry Pi with Arduino UNO or NANO, TEENSY, FEATHER or ESP32
- All required hardware included for any one of the five families
- Connector soldering required
