Category: INDUSTRIAL Automation
INDUSTRIAL Automation
Raspberry Pi IO Cards for Industrial & Building Automation.
Open Source hardware including complete schematics.
NodeRed, OpenPLC, Command Line and Python drivers
Showing all 12 results
Industrial Automation
$90.00
8-Layer Stackable Card
for Raspberry PiAdd to cart- Four Optically Isolated Digital Inputs with status LEDs
- Four 0 – 10V or 0 – ±10V Analog Inputs
- Four Optically Isolated 4-20mA Inputs
- Four Optically Isolated Open Drain Outputs, 24V/4A
- Four 0-10V Analog Outputs
- Four 4-20mA Analog Outputs
- Four General Purpose LEDs
- TVS Protection on all Inputs
- RS485 and CAN Ports
- 24VDC Power Supply
- On Board Hardware Watchdog
- On Board Resettable Fuse
- Real Time Clock With Battery Backup
- Pluggable Connectors
- Eight Level Stackable
- Command Line, Python Drivers
- Node-Red code examples
Building Automation
$80.00
8-Layer Stackable Card
for Raspberry PiAdd to cart- Eight jumper selectable Universal Inputs
- 1K or 10K thermistors
- 0-10V analog inputs
- Dry contact/counter inputs
- Four AC Triac Outputs, 0.5A/500V
- Four 0-10V Outputs
- 24VAC Power Supply
- Four General Purpose LEDs
- RS485 In and Out ports
- Real Time Clock with Battery Backup
- Pluggable Connectors
- Hardware Watchdog
- Status LEDs on all Digital Inputs and Outputs
- TVS protection on all inputs
- On-board resettable fuse
- Eight Level Stackable
- Command line, Python drivers
- Node-Red code examples
- Eight jumper selectable Universal Inputs
RTD Data Acquisition
$40.00
8-Layer Stackable Card
for Raspberry PiAdd to cart- Two ADS1248 24 bit delta-sigma converters (four channels each)
- Factory accuracy: 0.1%
- Maximum accuracy (through calibration): 0.01%
- Pluggable connectors
- On-board hardware watchdog
- On-board resettable fuse
- Eight Level Stackable
- Command line, Python drivers
- Node-Red code examples
- Optional -50°C to 450°C PT100 thermocouples
Raspberry Pi Relays 10A/240V
$30.00
8-Layer Stackable Card
for Raspberry PiAdd to cart- Four RELAYS with Status LEDs
- Eight layer stackable to 32 relays
- Heavy Duty Pluggable Terminal Blocks
- NO and NC contacts on all relays
- Switch loads of up to 10A and 240V
- Software self-test
- Command Line and Python Drivers
Raspberry Pi Watchdog
$25.00
with Battery Backup
for all Raspberry Pi’sAdd to cart- A must for all RPI mission critical installation
- Cycle RPI power after software lock-up
- Prevent SD Card damage during power outages
- Run for hours on Li-Ion 18650 battery
- On board battery charger, step-up converter and intelligent power monitor
- Dual power supply jacks: micro USB and barrel
- Provide up to 3.5A/5V power to Raspberry Pi from Li-Ion Battery
- On board resettable fuse
- Command line and Python drivers
Pluggable Breakout Card Type-3
$20.00
Accepting 24-14 AWG wires
for Raspberry PiAdd to cart- Routes all 40 I/O and power pins to pluggable terminal blocks
- Easy and secure field installation and debugging
- 150 mils Pitch Heavy Duty Pluggable Terminal Block Connectors
- Terminals rated voltage: 300V
- Terminals rated current: 8A
- Wire range: 24 – 14 AWG
- Brass standoffs, screws and nuts included
COMPARE TO COMPETITION
Smaller, cheaper, better.
