Tag: Raspberry Pi
Raspberry Pi
Showing all 11 results
Industrial Automation
$90.00
8-Layer Stackable Card
for Raspberry PiAdd to cart- Four Optically Isolated Digital Inputs with status LEDs
- Four 0 – 10V or 0 – ±10V Analog Inputs
- Four Optically Isolated 4-20mA Inputs
- Four Optically Isolated Open Drain Outputs, 24V/4A
- Four 0-10V Analog Outputs
- Four 4-20mA Analog Outputs
- Four General Purpose LEDs
- TVS Protection on all Inputs
- RS485 and CAN Ports
- 24VDC Power Supply
- On Board Hardware Watchdog
- On Board Resettable Fuse
- Real Time Clock With Battery Backup
- Pluggable Connectors
- Eight Level Stackable
- Command Line, Python Drivers
- Node-Red code examples
Building Automation
$80.00
8-Layer Stackable Card
for Raspberry PiAdd to cart- Eight jumper selectable Universal Inputs
- 1K or 10K thermistors
- 0-10V analog inputs
- Dry contact/counter inputs
- Four AC Triac Outputs, 0.5A/500V
- Four 0-10V Outputs
- 24VAC Power Supply
- Four General Purpose LEDs
- RS485 In and Out ports
- Real Time Clock with Battery Backup
- Pluggable Connectors
- Hardware Watchdog
- Status LEDs on all Digital Inputs and Outputs
- TVS protection on all inputs
- On-board resettable fuse
- Eight Level Stackable
- Command line, Python drivers
- Node-Red code examples
- Eight jumper selectable Universal Inputs
Home Automation
$50.00
8-Layer Stackable Card
for Raspberry PiAdd to cart- 32-bit Processor running at 48MHz
- Eight relays with status LEDs and pluggable connectors
- Eight layer stackable
- Eight 12-bit A/D inputs
- Four 12-bit DAC outputs (0-10V dimmers) or
- Four open-drain outputs (30V/5.7A MOSFETs)
- Eight optically isolated digital inputs
- 30 GPIOs (26 GPIOs from Raspberry Pi + 4 new)
- On-board hardware watchdog
- On-board resettable fuse
- Command line and Python drivers
- Node-Red source code examples
- All mounting hardware included: stand-offs, screws and nuts
- Hardware self-test with included loop-back card
- Open source hardware and schematics
RTD Data Acquisition
$40.00
8-Layer Stackable Card
for Raspberry PiAdd to cart- Two ADS1248 24 bit delta-sigma converters (four channels each)
- Factory accuracy: 0.1%
- Maximum accuracy (through calibration): 0.01%
- Pluggable connectors
- On-board hardware watchdog
- On-board resettable fuse
- Eight Level Stackable
- Command line, Python drivers
- Node-Red code examples
- Optional -50°C to 450°C PT100 thermocouples
Raspberry Pi Relays 10A/240V
$30.00
8-Layer Stackable Card
for Raspberry PiAdd to cart- Four RELAYS with Status LEDs
- Eight layer stackable to 32 relays
- Heavy Duty Pluggable Terminal Blocks
- NO and NC contacts on all relays
- Switch loads of up to 10A and 240V
- Software self-test
- Command Line and Python Drivers
Raspberry Pi RELAYS
$30.00
8-Layer Stackable Card
for Raspberry PiAdd to cart- Eight RELAYS with Status LEDs
- Eight layer stackable to 64 relays
- Heavy Duty Pluggable Terminal Blocks
- 4 Relays with NO and NC Contacts, rated 4A/120VAC or 4A/24VDC
- 4 Relays with NO only Contacts rated 8A/48VAC or 8A/24VDC
- Software self-test
- Command Line and Python Drivers
Raspberry Pi Watchdog
$25.00
with Battery Backup
for all Raspberry Pi’sAdd to cart- A must for all RPI mission critical installation
- Cycle RPI power after software lock-up
- Prevent SD Card damage during power outages
- Run for hours on Li-Ion 18650 battery
- On board battery charger, step-up converter and intelligent power monitor
- Dual power supply jacks: micro USB and barrel
- Provide up to 3.5A/5V power to Raspberry Pi from Li-Ion Battery
- On board resettable fuse
- Command line and Python drivers
Uno, Nano, Teensy, Feather, ESP32
$10.00
Raspberry Pi Replacement
for all I2C I/O CardsAdd to cart- Mechanical dimensions identical with Raspberry Pi HAT
- Replace Raspberry Pi with Arduino UNO or NANO, TEENSY, FEATHER or ESP32
- All required hardware included for any one of the five families
- Connector soldering required
