Showing all 5 results

• 

  Industrial Automation
  8-Layer Stackable Card
  for Raspberry Pi

  $90.00

  • Four Optically Isolated Digital Inputs with status LEDs
  • Four 0 – 10V or 0 – ±10V Analog Inputs
  • Four Optically Isolated 4-20mA Inputs
  • Four Optically Isolated Open Drain Outputs, 24V/4A
  • Four 0-10V Analog Outputs
  • Four 4-20mA Analog Outputs
  • Four General Purpose LEDs
  • TVS Protection on all Inputs
  • RS485 and CAN Ports
  • 24VDC Power Supply
  • On Board Hardware Watchdog
  • On Board Resettable Fuse
  • Real Time Clock With Battery Backup
  • Pluggable Connectors
  • Eight Level Stackable
  • Command Line, Python Drivers
  • Node-Red code examples

  Add to cart
• 

  Building Automation
  8-Layer Stackable Card
  for Raspberry Pi

  $80.00

  • Eight jumper selectable Universal Inputs
    • 1K or 10K thermistors
    • 0-10V analog inputs
    • Dry contact/counter inputs
  • Four AC Triac Outputs, 0.5A/500V
  • Four 0-10V Outputs
  • 24VAC Power Supply
  • Four General Purpose LEDs
  • RS485 In and Out ports
  • Real Time Clock with Battery Backup
  • Pluggable Connectors
  • Hardware Watchdog
  • Status LEDs on all Digital Inputs and Outputs
  • TVS protection on all inputs
  • On-board resettable fuse
  • Eight Level Stackable
  • Command line, Python drivers
  • Node-Red code examples

  Add to cart
• 

  Home Automation
  8-Layer Stackable Card
  for Raspberry Pi

  $50.00

  • 32-bit Processor running at 48MHz
  • Eight relays with status LEDs and pluggable connectors
  • Eight layer stackable
  • Eight 12-bit A/D inputs
  • Four 12-bit DAC outputs (0-10V dimmers) or
  • Four open-drain outputs (30V/5.7A MOSFETs)
  • Eight optically isolated digital inputs
  • 30 GPIOs (26 GPIOs from Raspberry Pi + 4 new)
  • On-board hardware watchdog
  • On-board resettable fuse
  • Command line and Python drivers
  • Node-Red source code examples
  • All mounting hardware included: stand-offs, screws and nuts
  • Hardware self-test with included loop-back card
  • Open source hardware and schematics

  Add to cart
• 

  RTD Data Acquisition
  8-Layer Stackable Card
  for Raspberry Pi

  $40.00

  • Two ADS1248 24 bit delta-sigma converters (four channels each)
  • Factory accuracy: 0.1%
  • Maximum accuracy (through calibration): 0.01%
  • Pluggable connectors
  • On-board hardware watchdog
  • On-board resettable fuse
  • Eight Level Stackable
  • Command line, Python drivers
  • Node-Red code examples
  • Optional -50°C to 450°C PT100 thermocouples

  Add to cart
• 

  Raspberry Pi Watchdog
  with Battery Backup
  for all Raspberry Pi’s

  $25.00

  • A must for all RPI mission critical installation
  • Cycle RPI power after software lock-up
  • Prevent SD Card damage during power outages
  • Run for hours on Li-Ion 18650 battery
  • On board battery charger, step-up converter and intelligent power monitor
  • Dual power supply jacks: micro USB and barrel
  • Provide up to 3.5A/5V power to Raspberry Pi from Li-Ion Battery
  • On board resettable fuse
  • Command line and Python drivers

  Add to cart