Description
PLUGGABLE BREAKOUT CARD for Raspberry Pi with male-female pluggable connectors.
The Pluggable Breakout Card connects the GPIO pins to heavy-duty pluggable terminal blocks. It can use used both for Raspberry Pi and for the HOME Automation Cards. The 2×20 pin header can be plugged into Raspberry Pi or into any stackable expansion card.
LAYOUT
Measuring only 33mm x 80mm, the Pluggable Breakout Card connects the Raspberry Pi GPIO pins to the outside world with reliable, screw-mount, 24 to 14 AWG wires.

WHAT’S IN YOUR KIT
- Breakout Type 3 for Raspberry Pi
- Mounting hardware
- Four 10 pin connector plugs
ALL OUR RASPBERRY PI BREAKOUT CARDS
We have three breakout cards for Raspberry Pi, to satisfy all your prototyping needs. All cards plug into the Raspberry Pi 40 pin GPIO connector and bring the IO’s to different terminal blocks.
- Screw Mount Breakout Card Type-1. The card has a large prototype area of 5 x 40 holes at 0.1″ spacing which can be used to test your own hardware. The terminal blocks accept 26 to 18 AWG wires and are rated 6A/150V.
- Spring Loaded Breakout Card Type-2. This card uses spring loaded terminal blocks, which permit rapid connection to I/O pins without any tools. The card has a prototype area of 7 x 19 holes at 0.1″ spacing which can be used to test your own hardware. The terminal blocks accept 22-18 AWG wires and are rated 5A-300V.
- Pluggable Breakout Card Type-3. This card connects the GPIO pins to heavy-duty pluggable terminal blocks. It can use used both for Raspberry Pi and for the HOME Automation Cards. The 2×20 pin header can be plugged into Raspberry Pi or into any stackable expansion card or HAT. The terminal blocks accept 24 to 14 AWG wires and are rated 8A/300V.
COMPARE TO COMPETITION
Same connectors but smaller card and cheaper.
Reviews
There are no reviews yet.