Building Automation Card plus
4 RELAYS & 4 Inputs

$100.00

Add 4 Heavy Duty Relays and 4 Universal Inptus to our Building Automation card for only $20. The relay are able to switch loads of up to 8A and 240VAC and to read inputs from 3V to 240V, and the Building Automation card gives you the following:

  • Eight jumper selectable Universal Inputs
    • 1K or 10K thermistors
    • 0-10V analog inputs
    • Dry contact/counter inputs
  • Pluggable Connectors 30-16 AWG wires
  • Four AC Triac Outputs, 0.5A/500V
  • Four 0-10V Outputs
  • 24VAC Power Supply
  • Four General Purpose LEDs
  • RS485 In and Out ports
  • Real Time Clock with Battery Backup
  • Pluggable Connectors
  • Hardware Watchdog
  • Status LEDs on all Digital Inputs and Outputs
  • TVS protection on all inputs
  • On-board resettable fuse
  • Eight Level Stackable
  • Command line, Python drivers
  • Node-Red code examples

Building Automation
8-Layer Stackable Card
for Raspberry Pi

  • Eight jumper selectable Universal Inputs
    • 1K or 10K thermistors
    • 0-10V analog inputs
    • Dry contact/counter inputs
  • Pluggable Connectors 30-16 AWG wires
  • Four AC Triac Outputs, 0.5A/500V
  • Four 0-10V Outputs
  • 24VAC Power Supply
  • Four General Purpose LEDs
  • RS485 In and Out ports
  • Real Time Clock with Battery Backup
  • Pluggable Connectors
  • Hardware Watchdog
  • Status LEDs on all Digital Inputs and Outputs
  • TVS protection on all inputs
  • On-board resettable fuse
  • Eight Level Stackable
  • Command line, Python drivers
  • Node-Red code examples

In stock

Four Relays Four Inputs
8-Layer Stackable Card
for Raspberry Pi

This board is replacing the 4-Relays board, adding four universal inputs and an RS485 port. Currently in production, stock expected mid-March. Two fully functional prototype samples can be ordered and shipped right now.

  • Four RELAYS with status LEDs
  • Four universal opto-isolated inputs with status LEDs
  • Eight layer stackable to 32 relays and 32 inputs
  • Pluggable connectors 30-16 AWG wires
  • NO and NC contacts on all relays
  • Switch loads of up to 8A and 240V
  • Read AC and DC, 3V to 240V inputs
  • Software self-test
  • Command Line and Python Drivers

Available on backorder

Available on backorder

Description

Building Automation System

Building Automation System
Building Automation Card plus 4-Relays

Building Automation Card Drivers

4-Relay Card Drivers

Additional information

Building Automation
8-Layer Stackable Card
for Raspberry Pi

Weight124 g
Dimensions10 × 7 × 2 cm
ANALOG INPUTS

8 ea. 0-10V, 8 ea. 10K thermistor, 8 ea. 1K thermistor

ANALOG OUTPUTS

4 ea. 0-10V

DIGITAL INPUTS

8 ea. Dry Contact

DIGITAL OUTPUTS

4 ea. 24VAC

POWER SUPPLY

24VAC/1A

Four Relays Four Inputs
8-Layer Stackable Card
for Raspberry Pi

Weight120 g
Dimensions10 × 7 × 2 cm
RELAYS

4 ea. 10A/240VAC

POWER SUPPLY

4.75-5.25V/3A

Reviews

There are no reviews yet.

Be the first to review “Building Automation Card plus
4 RELAYS & 4 Inputs”