Stack of 6 hats for 48 channels, each channel max 8000 samples (typically 2000Hz for 2 seconds is ok but I would aim faster sampling if possible as this is the lower end of what I need).Ability to ...
Is there a chance I could develop this myself if I had the code for the HAT? Would you be prepared to let me do this? Can it be modified and loaded easilty enough?
Hi Alex, Just checking if you have though any more around to exposing the extra built in functinality so I can do simultaneous measurements from all channels multiple stacks for a couple of seconds...
Yes, by saturated I mean reaching the ADC full scale. In the ADC spec sheet there is a function which flags if a channel is overdriven/saturated. So it would be nice to utilise this. This is a co...
My spec for triggered burst mode if you consider it: Stack of 7 hats for 56 channels, each channel max 8000 samples (typically 2000Hz for 2 seconds is ok).Ability to flag which channels saturated ...
Hi Alex, Is getting it working for all the channels something you might impliment in the future ? I notice the ADS131 allows for simultaneous sampling...
Hi Alex, Just a quick sanity check, I want to read up to 48 channels 'simultaneously' at 2000Hz, 2 seconds duration. I see the 'example.sh' only arms a single channel for capture. Is there a...
Ive found the lower level command to read all 8 channels at once so getting there and achieved better sampling rates. Having a play with this. Im thinking though that polling through the I2C is not...
Regarding the Eight 24-Bit Analog Inputs DAQ 8-Layer Stackable HAT I want to read all 8 channels simultaneously at 2kHz sample rate, for say 2 seconds then write to file. Does this mean I need to ...
