Coming Soon
We constantly develop new products based on customer's feedback and user's suggestions. If you need any functions or combinations which you do not see in our current offerings, please Contact Us. The following cards are currently under development and we plan to bring them to production based on your feedback.
1. MULTI-I/O HAT
The first version of this board has been released for prototypes. Then, we received feedback from a potential OEM customer, who asked if we could use 24V instead of 5V power, and add an RS232 port. We made the changes, Rev1.1 is in the works.
FEATURES
- Two isolated, or four common ground, jumper selectable digital inputs
- Two 3-wire RTD inputs with 24 bit A/D converters
- Two analog inputs, jumper selectable as 0-10V or 4-20mA
- Two analog outputs, jumper selectable as 0-10V or 4-20mA
- Two 8A/24V AC/DC relays with N.O. contacts
- Two servo control ports
- H-Bridge PWM Motor Driver
- RS485/MODBUS communication port
- RS232 driver connected to Raspberry Pi USART
- On-board hardware watchdog
- On-board fuse
- Eight Status LED's: 6 general purpose, 2 for relays
- Real Time Clock with battery backup (battery not included)
- Stackable to eight layers
- 24VDC Power Supply for Industrial applications
- Comprehensive Node-RED tutorial with examples
2. 8-INPUTS 8-OUTPUS 4-20mA

FEATURES
- Eight 4-20mA Inputs
- Eight 4-20mA Outputs
- Eight Programmable Status LEDs
- RS485/MODBUS Communication
- On-board hardware watchdog
- On-board resettable fuse
- Real Time Clock with battery backup (battery not included)
- Stackable to eight layers
- 12-24VDC Power Supply
3. 8 DIGITAL INPUTS, 8 DIGITAL OUTPUTS

FEATURES
4. 8-INPUTS 10-OUTPUS 0-10V

FEATURES
5. 8-THERMOCOUPLES
FEATURES
6. INDUSTRIAL WATCHDOG WITH BATTERY BACKUP
FEATURES
- 24VDC IN and OUT power supply
- Power cycle Raspberry Pi in case of software lockup
- Provide 24V/1A power from battery to other industrial cards
- Battery Charge status indicators
- RS485/MODBUS port with dual connectors
- Battery overtemperature protection circuit
8. ESP32 Raspberry Pi SUBSTITUTE
- Raspberry Pi substitute, GPIO and form factor compatible
- Emulates 24 out of 29 Raspberry Pi GPIO pins
- Pin compatible three UART ports
- Pin compatible I2C and SPI ports WiFi and Bluetooth (low energy)
- 10/100 Mbps RJ45 Ethernet port
- On-board SD-Card socket
- USB Type C port for power, programming and debug
- ESP32 processor up to 240MHz
- Power and Ethernet LEDs
- Arduino and Open-PLC programmable
- Webserver, MQTT protocols
8. 16 UNIVERSAL ANALOG/DIGTAL INPUTS
- Sixteen individually configurable analog/digital inputs
- Each input can be configured to:
- Read 1K Thermistors
- Read 10K Thermistors
- Read 0-10V Analog Inputs, 500 Hz sample rate
- Read dry contact/counter inputs
- Real Time Clock with Battery Backup
- Sixteen programmable status LEDs
- On board hardware watchdog
- Resettable fuse
- Reverse polarity protection
- Uses only I2C port, leaves all GPIO pins available
- TVS protection on all inputs
- 16 programmable status LEDS