- Breakout Card Type 2 Spring Loaded 22-18 AWG for Raspberry Pi
- 3.5mm Pitch PCB Spring-loaded Terminal Block Connectors
- Stainless steel wire guard
- Phosphor bronze, tin plated pin header
- Rated Voltage: 300V
- Rated Current: 5A
- Contact Resistance: 20 mOhms
- Insulation Resistance: 5000 MOhms/DC 1000V
- Wire Range: 22-18 AWG
- Strip Length: 8-9 mm
- Breakout Card Raspberry Pi
SPRING LOADED BREAKOUT CARD for Raspberry PiThis card plugs into the Raspberry Pi 40 pin socket and brings all the GPIO pins to spring-loaded terminal blocks, allowing rapid connection to GPIO pins. The large prototype area of 7 x 19 holes can be used to test your own hardware. Laminated plastic, credit-card size index card shows all the terminal block connections. Raspberry Pi GPIO pins are brought out grouped by functions and color coded.
TERMINAL BLOCK CONNECTIONS PINOUTThe plastic laminated card included with the breakout card shows the terminal block connection. The card represents a top view image of the four spring loaded connectors. The back of the card shows the Raspberry Pi GPIO pins.
WHAT'S IN YOUR KIT
1. Spring Loaded Breakout Card for Raspberry Pi
2. Brass standoffs, nuts and screws
3. Laminated plastic card showing pinout and Raspberry Pi GPIO
OTHER BREAKOUT CARDS
We have three breakout cards for Raspberry Pi, to satisfy all your prototyping needs. All cards plug into the Raspberry Pi 40 pin GPIO connector and bring the IO's to different terminal blocks.
The card has a large prototype area of 5 x 40 holes at 0.1" spacing which can be used to test your own hardware. The terminal blocks accept 26 to 18 AWG wires and are rated 6A/150V.
This card uses spring loaded terminal blocks, which permit rapid connection to I/O pins without any tools. The card has a prototype area of 7 x 19 holes at 0.1" spacing which can be used to test your own hardware. The terminal blocks accept 22-18 AWG wires and are rated 5A-300V.
This card connects the GPIO pins to heavy-duty pluggable terminal blocks. It can use used both for Raspberry Pi and for the Home Automation Cards. The 2×20 pin header can be plugged into Raspberry Pi or into any stackable expansion card or HAT. The terminal blocks accept 24 to 14 AWG wires and are rated 8A/300V.
We were looking for a good way to connect cables directly to the Rasperry Pi for a long time. Here we found it, especially the spring clips are excellent to ensure a long-lasting contact.
Thank you for this very good product.
Easy to swap pins in and out or just leave them connected in a production setting. A++++
Easy access to GPIO pins through spring-loaded connectors. Nifty plastic credit card lists the signal positions on the connectors and the GPIO pinout.