Perfect for your Home Automation. Analog and Digital IO's, relays, watchdog, PWM and more.

The IO-PLUS card is a stackable expansion card for Raspberry Pi.  The card is compatible with all Raspberry Pi versions from Zero to 4.  It has all the necessary IOs for your Home Automation Projects. 

The 8 on-board relays have contacts brought out to heavy duty pluggable terminal blocks,  which make the card easy to use when multiple cards are stacked up.  Four relays with N.O. contacts can switch up to 8A/48VAC or 8A/24VDC.  The other four relays with N.O. and N.C. contacts and can switch 4A/120VAC or 4A/24VDC.  Status LEDs show when RELAYS are ON or OFF.

All the other IO's can be brought to pluggable terminal blocks using our Breakout card Type 3

The IO=PLUS card needs 5V to operate and can be powered from Raspberry Pi or from it's own 2.1mm barrel connector. 

FEATURES:

  • 32-bit Processor running at 48MHz
  • Eight relays with status LEDs and pluggable connectors
  • Eight layer stackable
  • Eight 12-bit A/D inputs
  • Four 12-bit DAC outputs (0-10V dimmers) or
  • Four open-drain outputs (30V/5.7A MOSFETs)
  • Eight optically isolated digital inputs
  • 30 GPIOs (26 GPIOs from Raspberry Pi + 4 new)
  • On-board hardware watchdog
  • On-board resettable fuse
  • Command line and Python drivers
  • Node-Red source code examples
  • All mounting hardware included: stand-offs, screws and nuts
  • Hardware self-test with included loop-back card
  • Open source hardware, schematics in the User's Guide

The IO-PLUS cards share the I2C bus using only two of the Raspberry Pi’s GPIO pins to manage all eight cards.  This feature leaves the remaining 24 GPIOs available for the user.

KIT CONTENT:

  • IO-PLUS add-on card for Raspberry Pi
  • Mounting hardware
    • Four M2.5x18mm male-female standoffs
    • Four M2.5x5mm screws
    • Four M2.5 nylon nuts
  • Two jumpers
  • Two 6-pin female mating connector plugs.
  • Two 4-pin female mating connector plugs.

RELAYS
4A/125V 8 ea.
DIGITAL INPUTS
Opto-isolated 8 ea.
DIGITAL OUTPUTS
Direct OUT, TTL 4 ea.
Open Drain Mosfet, 4A/24V 4 ea.
ANALOG INPUTS
0-3.3V 8 ea., 12 bit
ANALOG OUTPUTS
0-10V 4 ea. PWM
POWER SUPPLY
Input Range 4.75 - 5.25 VDC

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Raspberry Pi Stackable Card for Home Automation

  • $50.00


Related Products

8-RELAYS Stackable Card for Raspberry Pi

8-RELAYS Stackable Card for Raspberry Pi

The 8-RELAYS card is a stackable expansion card for Raspberry Pi.  The card is compatible with..

$30.00

Home Automation Card User's Guide

Home Automation Card User's Guide

Perfect for your Home Automation. Analog and Digital IO's, relays, watchdog, PWM and more.  Th..

$0.00

4-RELAYS Heavy Duty Stackable Card for RPi

4-RELAYS Heavy Duty Stackable Card for RPi

Stackable to 8 layers, the 4-RELAYS card can control loads of up to 10A and 250V.  All relays ..

$25.00

Super-Watchdog for Raspberry Pi

Super-Watchdog for Raspberry Pi

Hardware watchdog and battery backup for all Raspberry Pi boards; Open Source design including Schem..

$25.00

DIN-RAIL Kit Type 1 for Raspberry Pi

DIN-RAIL Kit Type 1 for Raspberry Pi

This kit permits installing all versions of Raspberry Pi, from Zero to 4, on a DIN Rail.  The ..

$10.00

BREAK-OUT Card Type 1 for Raspberry Pi

BREAK-OUT Card Type 1 for Raspberry Pi

This card can be used both for Raspberry Pi and for IO-PLUS cards. The 2x20 pin header can be plugg..

$12.00

BREAK-OUT Card Type 2 for Raspberry Pi

BREAK-OUT Card Type 2 for Raspberry Pi

This card plugs into the Raspberry Pi 40 pin socket and brings all the GPIO pins to spring-loaded te..

$14.00

8-MOSFETS Stackable Card for Raspberry Pi

8-MOSFETS Stackable Card for Raspberry Pi

The 8-MOSFETS card is a stackable expansion card for Raspberry Pi.  The card is compatible wit..

$40.00

Stackable DIN-Rail Kit Type 2 for Raspberry Pi

Stackable DIN-Rail Kit Type 2 for Raspberry Pi

This kit permits installing all versions of Raspberry Pi, from Zero to 4, and any number of add-on c..

$10.00

Heavy Duty BREAK-OUT Card Type 3 for Raspberry Pi

Heavy Duty BREAK-OUT Card Type 3 for Raspberry Pi

This break-out card connects the GPIO pins to heavy-duty pluggable terminal blocks.  It can us..

$20.00

RTD Data Acquisition Stackable Card for Raspberry Pi

RTD Data Acquisition Stackable Card for Raspberry Pi

The MEGA-RTD is compatible with all Raspberry Pi versions from Zero-4 and offers a compact and inexp..

$40.00

Tags: relays, analog inputs, analog outputs