16 Products
-
In stockDIN-RAIL Kit Type2 Perpendicular Mount for Raspberry Pi
Install Raspberry Pi and any number of HATs perpendicular to the DIN-Rail; One kit for up to 5 HATs. -
In stockSmart Fan HAT the Best Cooling Solution for Raspberry Pi
PWM controlled 40x40x10mm Fan keeps Raspberry Pi temperature constant; Stackable with any other HAT. -
In stockDIN-RAIL Kit Type1 Parallel Mount for Raspberry Pi
Install Raspberry Pi and multiple HATs parallel on the DIN-Rail; 90% rotation; Raspberry Pi 1 to 5. -
Sale
In stockBreakout Card Kit Pluggable-Prototype-Breadboard SM/TH for Raspberry Pi
Routes all 40 GPIO pins to pluggable terminal blocks; Main card for Through Hole, two add-on cards for Surface Mount DIY projects. -
In stockBeagle-Pi Raspberry Pi Emulator Using Beagle Bone Black
Replace Raspberry Pi with Beagle Bone: Map all GPIOs, I2C, SPI and UART ports; Runs Linux on internal Flash. -
In stockPT100 Sensor for RTD Data Acquisition for Raspberry Pi
PT100 Sensor for RTD HAT; -50°C to 450°C range; ±0.5°C Accuracy, 2m wires, 3-wire terminals with prong ends. -
In stockEight Serial Ports HAT 2-Layer Stackable for Raspberry Pi
Three RS232, one RS485, one RS422, one CAN, one 1-Wire and one M-BUS; Status LEDs, Hardware Watchdog. -
In stockFour Serial Ports RS485 and RS232 Stackable HAT for Raspberry Pi
Four serial ports confugurable as RS232 or RS485 from DIP switches. Non-stackable -
In stockBreakout Card Type2 Spring Loaded 22-18 AWG for Raspberry Pi
Brings all 40 Raspberry Pi GPIO pins to spring-loaded connectors. Prototype area. -
In stockTwo Serial Ports RS485 and RS232 Stackable HAT for Raspberry Pi
One RS485 and one RS232 drivers connected to Raspberry Pi UARTS 1 and 3; Works with Raspberry Pi 3-5; -
In stockBreakout Card Screw Mount Type1 26-18 AWG for Raspberry Pi
Routes all 40 GPIO pins to screw terminal blocks; 24 - 18 AWG wiring; Works with Raspberry Pi ZERO through 5. -
Sale
In stockI/O Accessories Kit for I/O Learning Card for Raspberry Pi
I/O Kit for Hobby Experiments: ON-OFF-ON Switch, 10K Thermistor, Photoresistor, Potentiometer, RS485 Temperature and Humidity Sensor, Micromotor. -
Sale
In stockArduino Uno, Nano, Teensy, Feather or ESP32 Raspberry Pi Replacement Kit
Replace Raspberry Pi with Arduino UNO or NANO, TEENSY, FEATHER or ESP32. Identical size with Pi HATs; Soldering required. -
Sale
In stockSix-in-one LCD Adapter Kit Using 2004 or 1602 LCDs for Raspberry Pi
Supports 1602, 2004, 77x47mm, 98x60mm, monochrome/RGB LCDs; Rotary encoder, six pushbuttons. -
Sale
In stockSelf Test Cable for Home Automation HAT for Raspberry Pi
Self-test the inputs and outputs of the Home Automation HAT with the loopback cable. -
In stockHALL Effect Current Sensor for Current Sensor DAQ HAT for Raspberry Pi
HALL effect sensor type HSTS016L for Current Sensor DAQ HAT; ±20A range; 2.5±0.625V output
